Independent guide. Not affiliated with any city, village, town or county.

permit.guide
Outagamie County, Wisconsin

Village of Kimberly fence permit

Do you need a fence permit in the Village of Kimberly? Yes. The Village of Kimberly requires a permit before you build a fence.

permit.guide can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the Village of Kimberly (site plan, aerial photo and filled-in details) in a few minutes. Start with your address.

Quick facts

Permit required
Yes source
Fee
$50 source
Side and rear yards
6 ft in required setback areas (8 ft where the fence meets principal-structure setbacks, or on residential lots abutting business/industrial use) source
Front (street) yard
3 ft (4 ft if at least 50% open; 6 ft on lots with a 'no access' street or abutting a railroad) source
Corner lots
2½ ft in vision clearance areas; up to 6 ft in the street yard on the long side of a corner lot if set back from the short-side street line by at least the greater of the house's existing or required setback; fences within 15 ft of a driveway must meet vision requirements source
Distance from lot line
No minimum lot-line setback stated; a boundary fence is one on or within 3 ft of a property line. source
Good side faces
Finished side faces the abutting property; support posts face the fence owner. source
Not allowed
Barbed wire, razor wire, above-ground electric fencing, chain link with barbed or sharp ends, snow fencing, chicken wire, welded wire, hardware cloth and similar materials (exceptions for industrial security fences and temporary snow fencing). source
How to apply
Email, in person source
Plan your fence and build the applicationLook up your address, draw the fence on an aerial photo of your lot, and get a site plan and filled-in application you can send to Village of Kimberly.

How to file for a fence permit in the Village of Kimberly

Steps based on vokimberlywi.gov — building inspections

  1. Download the Village building permit application, save it to your device, and fill it in (include the job value for materials and labor).
  2. Attach a site plan showing where the fence will go.
  3. Submit it electronically to [email protected] or bring it to the Village Office, 515 W. Kimberly Ave. ((920) 788-7507).
  4. Pay the $50 fence permit fee (check, cash or card; card in the office or online). Allow up to 10 business days for zoning and permit review.
  5. Schedule the fence layout inspection with inspector Stephanie Potter (608-617-5691) before setting posts.
  6. Call Diggers Hotline (811) at least 3 business days before digging.
Paying
$50 fence permit fee; check, cash or card (card in office or online only)
Review time
Allow 10 business days for approval; permit issued after fee, zoning approval and building inspection approval
Inspections
Fence layout inspection before posts and fencing work begin

Who to contact

Stephanie Potter
Building Inspector (inspections)

Phone
608-617-5691
Hours
Village Office Mon-Thu 8 a.m.-4 p.m.; Fri 8 a.m.-12 p.m.
Address
Village Office, 515 W. Kimberly Avenue, Kimberly, WI 54136

Contact from vokimberlywi.gov — building inspections

What to submit

  • Building permit application (fillable PDF), including job value (materials and labor)
  • Site plan showing the fence
  • Sketch or design of the fence (approved before construction)

Official application form or packet

Other rules to know

  • The fence layout must be inspected before posts and fencing work begin.
  • The Village publishes Fence Permit Guidelines and a Fences, Hedges, Dog Kennels brochure (linked from the Building Inspections page) with the detailed rules.
  • A sketch or design must be approved before construction; replacing more than 10% of a nonconforming fence also needs a permit. Temporary fences are exempt.
  • Decorative posts at least 6 ft apart may extend 8 inches above the maximum height.

Before you dig

Call Diggers Hotline at 811 (or file online at diggershotline.com) at least 3 business days before digging post holes. Find your lot corner markers and keep the fence on your side of the line. County parcel maps can be off by several feet; if you're not sure where the line is, a licensed land surveyor can stake it.

Frequently asked questions

Do I need a permit to build a fence in the Village of Kimberly, WI?

Yes. The Village of Kimberly requires a permit before you build a fence. A sketch or design must be approved before construction; replacing more than 10% of a nonconforming fence also needs a permit. Temporary fences are exempt.

How tall can a fence be in the Village of Kimberly?

Side and rear yards: 6 ft in required setback areas (8 ft where the fence meets principal-structure setbacks, or on residential lots abutting business/industrial use). Front (street) yard: 3 ft (4 ft if at least 50% open; 6 ft on lots with a 'no access' street or abutting a railroad). Corner lots: 2½ ft in vision clearance areas; up to 6 ft in the street yard on the long side of a corner lot if set back from the short-side street line by at least the greater of the house's existing or required setback; fences within 15 ft of a driveway must meet vision requirements.

How close to the property line can I put a fence in the Village of Kimberly?

No minimum lot-line setback stated; a boundary fence is one on or within 3 ft of a property line.

Which side of the fence has to face the neighbor in the Village of Kimberly?

Finished side faces the abutting property; support posts face the fence owner.

How much is a fence permit in the Village of Kimberly?

$50.

How do I apply for a fence permit in the Village of Kimberly?

Download the Village building permit application, save it to your device, and fill it in (include the job value for materials and labor). Attach a site plan showing where the fence will go. Submit it electronically to [email protected] or bring it to the Village Office, 515 W. Kimberly Ave. ((920) 788-7507). Pay the $50 fence permit fee (check, cash or card; card in the office or online). Allow up to 10 business days for zoning and permit review. Schedule the fence layout inspection with inspector Stephanie Potter (608-617-5691) before setting posts. permit.guide can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the Village of Kimberly (site plan, aerial photo and filled-in details) in a few minutes.

Who do I contact about a fence permit in the Village of Kimberly?

Stephanie Potter, Building Inspector (inspections). Phone 608-617-5691.

Sources

Summarized from the Village of Kimberly's own ordinances, forms and permit pages. Each link opens the original.

Ordinance: Zoning Code § 525-96 Fences and Hedges

  1. vokimberlywi.gov — building inspections
  2. vokimberlywi.gov — 2026 Draft Building Fee Summary 1
  3. vokimberlywi.gov — Building Permit Application FINAL
  4. ecode360.com — Municipal code

Work for the Village of Kimberly? Help us keep this right

If anything on this page is wrong or out of date, tell us and we'll fix it. Municipal staff reports are reviewed first. Please include a link to the current ordinance, form or fee schedule if you can.